Wall-mounted and floor-standing enclosures for electrical equipment, from small junction boxes to feeder pillars and control panels, with the cable trays that connect them.
Enclosures protect electrical equipment and the people who work near it. We make them in CRCA, galvanised and stainless steel, with punched cable entries, gasketed doors, mounting plates and powder coat. Our GI modular junction boxes are a separate range with eight sizes.
Heavy-gauge (3 mm) free-standing outdoor cabinet for low-voltage distribution. The changes from a small wall box are the base ring, the rain canopy, double door with a 3-point lock and ventilation that keeps rain out.
4 Bays (4 × 22 kW AC), IP54, with MCCB / RCD Compartments
Indoor floor-standing cabinet for control panels, MCC, PLC and VFD panels. Made to order in CRCA 2.0 mm, to your drawing.
An operator console-style control centre: 1,000 wide, 1,400 high with a sloped upper front carrying the HMI and push-buttons. Two doors give access to the wiring.
A drive cabinet for variable frequency drives: forced ventilation through filtered fans, an EMI-tight door gasket and separate compartments for power and control wiring.
A PLC panel with a chassis plate, a DIN-rail field for I/O modules and a segregated cable duct up one side. Depth 500 keeps it slim for control rooms.
A protective housing for a distribution transformer, ventilated by louvres and shielded from rain (IP23): heavier 2.5 mm sheet and two doors so the transformer can be reached from the front.
A 1,200 × 2,000 × 800 expandable cabinet whose side panels carry a common bolt pattern so several cabinets can be bayed side by side.
A power-factor-correction panel: louvred side panels or fans for the heat of capacitors and reactors, a reinforced capacitor shelf and a controller cut-out on the door.
A metering cubicle with a sealable CT/PT chamber, a hinged meter door with a polycarbonate window and lead-seal hasps. Dimensions and window follow the utility's drawing.
A control panel with a C-post frame punched on a 25 mm pitch, removable roof and gland plates, and front-only access so it can stand against a wall.
Floor, 600 × 1,800 × 450, Ventilated, with Mounting Plate
48 V 50 A, Floor, Ventilated, 600 × 1,000 × 500, with Mounting Plate
1,200 × 800 × 1,100, with Sloped Panel Field and Keyboard Shelf
A rugged portable board for construction sites: 2 mm sheet, a sloped hood over the industrial sockets (IP44), a padlock hasp and lifting eye.
An 8-meter bank: a 2 mm mounting plate with eight meter cut-outs, a door with windows, lead-seal hasps and an incomer compartment. The 4- and 12-meter versions change only the width.
A weather- and sound-proof canopy that slides over a diesel genset: two big side doors, roof, inlet and outlet attenuators with acoustic foam and a chimney.
2.0 × 1.5 × 2.0 m, Mesh Panels, Lockable Gate (Transformer and Panel Fence)
The commonest box in the sector: one hinged door, a one-piece folded body, a mounting plate on studs and a DIN rail.
Connection points for electrical circuits with terminals. Made to order in CRCA 1.2 mm / SS304 1.0-1.2 mm / GI, to your drawing.
A 42-way surface panel board with a main MCCB of 100-400 A: three rows of MCBs on DIN rail plus an MCCB plate at the top.
Recessed electrical access points for floor installation. Made to order in SS304 2-3 mm or MS 3 mm, to your drawing.
A 24-way distribution box: two rows of 12 ways, surface or flush mounted. Made to order in CRCA 1.0-1.5 mm, to your drawing.
A lighting-control panel for 8-64 zones: contactors and relays on DIN rail, a controller plate and a cut-out for the gateway.
A single-phase or three-phase meter box in galvanised sheet with a window and a lead-seal hasp so the utility can seal it. GI needs a zinc-safe weld or a rivet-and-seam construction.
Made to order in SS304 / SS316 1.5 mm, 400 × 500 × 200 mm. Size, finish and fittings to your drawing.
A small control station with 1-3 holes of Ø22.5 mm for push-buttons and an E-stop. Made to order in CRCA 1.2 mm / SS304 1.0 mm, to your drawing.
A pole-mounted feeder box for street lighting: pole-band slots on the back, gland plate at the bottom, a rain hood over the door and a lightning-arrester bracket inside.
A distribution board with a gasketed outer door and a hinged transparent (or cut-out) inner dead-front door, so breakers can be inspected without exposing live parts.
A smart or prepaid meter box with a 3 mm polycarbonate window over the display and an external plastic-covered antenna pocket, because a closed steel box would block the radio signal.
4 / 8 / 12-Way, Hinged Door with Trim Frame, IP30
Wall-Mount (DOL / Star-Delta), 600 × 800 × 250, Rain-Hooded, IP54
300 × 300 × 150, Hinged Door, IP65, CRCA or GI, in 12 Sizes from 100 to 600 mm
200 × 150 × 80, IP54, GI or CRCA, in 10 Sizes from 75 to 500 mm
305 × 305 × 152 mm (12 by 12 by 6 in), Screw Cover, GI, in 12 NEMA-Style Inch Sizes from 4 to 36 in
300 × 300 × 150, SS304 or SS316L, IP66, Hinged Door, in 9 Sizes from 100 to 600 mm
300 × 200 × 120, 5052-H32 Sheet, IP65, Hinged Door, Light Weight, in 8 Sizes from 100 to 500 mm
300 × 300 × 120, IP66, DIN-Rail Terminal Rails, Earth Bar and Tag Plate, 12 to 144 Terminals
300 × 300 × 150, IoT Sensor Bay (Temperature, Humidity, Door, Water Ingress), Antenna Window, IP66
300 × 300 × 150, Breather Vent, Drain, Anti-Condensation Heater Bracket and Sun Shield, IP66
300 × 300 × 150, 3 mm Body, Shrouded Hasp, Security Screws and Tamper Switch, IP65
400 × 300 × 150, Barrier Partition, Two Gland Plates and Two Earth Bars, IP65
200 × 200 × 100 Module, Bolt-Together Coupling Frames, 1 to 4 Modules, IP65
300 × 200 × 120, Tool-Less Swing Handle, Captive 180-Degree Hinge and Door Stay, IP66
400 × 300 × 200, Multi-Cable Transit Frame Plate, Hinged Door, IP66
200 × 200 × 100, Strap-Clamp Plates and Sun Shield, IP65
Perforated (ventilated) tray, the main cable-management product. Made to order in GI 1.2-2.0 mm (widths 100-600 mm), to your drawing.
A protective case for busbars up to 4,000 A: a large 300 × 200 section in 3 mm sheet. Aluminium or copper bars are fitted by the busbar maker; the enclosure only carries and protects them.
Surface-mounted trunking for offices, labs and plant rooms: a 100 × 50 base with return lips and a snap-on cover.
Wall-mounted MCB and distribution boxes, control and meter boxes, floor-standing panels and pillars, junction and pull boxes, cable trays and ladders, and guard cages.
Weatherproof boxes are designed to an IP target such as IP54 or IP65 and confirmed by a water-spray test on the first article. Ratings and approvals are agreed on your order.
Yes. Send a drawing with the punch layout and we quote, make a first article for your approval and repeat the order.
From small junction boxes (75 mm) to floor-standing panels over 2 m high. Standard sizes are listed; any other size is made to drawing.
Tell us what you need, how many, and by when. We reply with a clear quotation.
