Street-Light Pole Feeder / Control Box
A pole-mounted feeder box for street lighting: pole-band slots on the back, gland plate at the bottom, a rain hood over the door and a lightning-arrester bracket inside.
3D illustration of the reference design
Electrical & Power · Wall / surface enclosures (one door, up to ~800 mm)
IP65 Double-Door Distribution Board with Transparent Inner Door
A distribution board with a gasketed outer door and a hinged transparent (or cut-out) inner dead-front door, so breakers can be inspected without exposing live parts.
Specification
| Overall size (W × H × D) | 500 × 600 × 150 mm |
|---|---|
| Material and thickness | CRCA cold-rolled sheet; body 1.2 mm, door 1.2 mm, plate 2 mm |
| Protection target (confirmed by test on the order) | IP65 |
| Doors and access | 1 door(s); quarter-turn cam lock, common key |
| Mounting | 4 external welded lugs (slots 8 × 14) |
| Finish | Powder coat RAL 7035 (light grey) textured, 60-80 µm |
| Product code | 2.11 |
Fitted to order
- Hinge – outer door
- Lock – outer door
- Gasket – outer door
- Studs / earth
- Fasteners
- Polycarbonate
- Second hinge set
- Finish
Reference design, made to order. Size, material, finish and fittings follow your drawing. Protection ratings and loads are design targets, confirmed by test on the first article of each order.
Part of the range: Electrical enclosures and panels
Related products
You may also need.
Smart-Meter Enclosure with Viewing Window and Antenna Pocket
A smart or prepaid meter box with a 3 mm polycarbonate window over the display and an external plastic-covered antenna pocket, because a closed steel box would block the radio signal.
Push-Button / Control Station Enclosure
A small control station with 1-3 holes of Ø22.5 mm for push-buttons and an E-stop. Made to order in CRCA 1.2 mm / SS304 1.0 mm, to your drawing.
Need a different size or material?
Send a drawing, a sample or a description. We make it to your specification and reply with a clear quotation.