Night Vision Cases
A protective case for night-vision goggles: a 300 × 200 × 120 aluminium can with a gasket, a pressure-equalising valve and a die-cut foam insert that holds the optics clear of the metal.
Industry
Defence and military storage and field equipment, made to your drawing
Steel foot lockers and equipment cases, kit lockers, field tables and desks, shelter frames, equipment racks and mounting brackets, with shims and spacers for equipment mounting and alignment.
Rugged storage and field furniture
Equipment in the field is carried, stacked, dropped and left in the rain. Our defence range is built for that life: steel foot lockers and storage crates with latches and handles, night-vision and instrument cases, vehicle stowage boxes, personal kit lockers and key-control cabinets, finished in powder coat, zinc-nickel plating or plain stainless to suit the use.
For command posts and field offices we make folding tables, desks, cots and shelter frames that pack flat and set up quickly, and equipment racks, including a 24U rack on wire-rope isolators for vibration.
Your specification, our fabrication
Approvals, test standards and security clearances belong to your programme. We build to the drawing and the test plan agreed with you, and we state plainly what we can meet and what has to be shown by test before the order is accepted.
What we make
Products for defence and military.
Every product is made to order, in the size, material and finish you specify.
- Foot lockers, storage crates and instrument cases
- Vehicle stowage and jerry-can boxes
- Personal kit lockers and key-control cabinets
- Folding tables, desks and field cots
- Equipment racks, including shock-isolated racks
- Mounting brackets and shims for equipment alignment
The range
Choose a product, or send a drawing.
Add any product to your enquiry list and we quote them together. Anything not listed is made to your drawing.
Steel containers, cases and lockers
9 products
Military Foot Lockers
Heavy-duty personal storage for military personnel. Made to order in CRCA 1.5 mm (16 ga), to your drawing.
Storage Containers
Rugged containers for military supplies and equipment. Made to order in MS 5 mm (welded) or 1.5-3 mm, to your drawing.
Heavy Duty Tool Boxes
A 750 × 350 × 350 maintenance tool box for 100 kg: 2 mm sheet with rolled ribs, corner guards, two padlock hasps and a lift-out tray.
Foot Locker with Zinc-Nickel Plating and Stainless Hardware
The foot locker with a zinc-nickel or duplex (galvanised plus powder) coating and stainless hasps and hinge pin for salt-laden service.
Vehicle Stowage / Jerry-Can Box
A lockable steel box that bolts to a vehicle floor or trailer bed and takes jerry-cans, tools or spares.
More in this group: Personal Kit Locker
Folding tables, desks and shelter frames
14 products
Command Post Tables
Collapsible tables for tactical operations centres. Made to order in Al 6061 tube + Al 5052 top, to your drawing.
Field Workstation Desks
A folding field desk 1,000 × 600 × 750 under 15 kg: a keyboard tray, a rugged-laptop cradle and an integrated cable channel on the top, with spring-pin folding legs.
Camouflage Shelter Frames
A quick-deploy shelter frame 2.4 m square and 2.2 m high in 6061 aluminium tube: four legs, roof and mid rings and push-button pin joints, carrying a camouflage net or fabric skin.
Folding Field Cot Frame
A folding field cot 650 × 1,900 × 400 in aluminium tube: side rails and cross-rails carry a canvas bed, and folding X-legs lock with pivot pins.
Field Communications Table with Rack Bay
Made to order in Aluminium table top + 19-inch open frame, 1,200 × 600 × 750 mm. Size, finish and fittings to your drawing.
More in this group: Mess-Hall Serving Trolley · Vehicle Roof Rack · Folding Steel Barricade · Field-Kitchen Cooking-Range Stand · Unit Stores Rack · Sentry Box
Brackets and mounting hardware
5 products
Vehicle Mounting Brackets
A shock-loaded bracket for equipment on a military vehicle. Made to order in HT E350 4-8 mm, to your drawing.
Mounting Hardware
Specialised brackets for military equipment installation. Made to order in HT E350 / alloy steel, 3-8 mm, to your drawing.
Vehicle Radio Mounting Tray with Shock Mounts
A tray that carries a vehicle radio on four shock isolators: a 4 mm plate 250 × 300 with a front lip, isolator holes and strap eyes, loaded with 15 kg × 4 for shock.
Spare-Wheel and Jerry-Can Carrier Bracket
A swing-arm carrier for a 25-30 kg spare wheel or jerry-can: a 150 wide, 6 mm E350 arm with a gusset, a hinge pin and a padlock hasp; loaded with the wheel weight × 4 for shock.
More defence & military products
3 products
Equipment Racks
Heavy-duty racks for military communications equipment. Made to order in CRCA 3.0 mm posts, to your drawing.
Related ranges
Also from Essar
Shims for defence
U-shims, shim rings, packing and laminated shims, 0.05 to 6 mm, made to your drawing
ExploreAlso from Essar
Storage racks and lockers
Shelving, pallet racks, tool and kit lockers
ExploreAlso from Essar
Server racks and network cabinets
42U to 48U racks, open frames, wall-mount and outdoor cabinets
ExploreFAQ
Defence and military: questions
Do you build to military specifications?
We build to your drawing and the test plan agreed with you. Give us the specification with the enquiry, and we confirm what we can meet and what must be demonstrated by test before we quote.
Can you plate or coat for harsh environments?
Yes. Finishes include powder coat, zinc-nickel plating and stainless steel. Tell us the environment and the life you need, and we recommend a finish.
Can you make small batches and prototypes?
Yes. We make a single prototype or a repeat batch, and repeat lots follow the approved first sample.
Send your drawing or your list
Tell us what you need for defence and military: the product, the size, the material and how many. We reply with a clear quotation.