Energy Storage, Grid and Smart Metering
Outdoor C&I Battery Cabinet
215 kWh Liquid-Cooled, 1,300 × 1,100 × 2,200, IP55, Fire-Vent Panel
Industry
Metalwork for the energy sector, made to your drawing
Battery cabinets and racks, EV charger cabinets and pedestals, solar mounting structures and inverter shields, smart-meter and distribution boxes, substation structures, and wind-tower and hydropower steelwork.
Cabinets and structures for the energy shift
Energy projects use sheet and structural steel in large quantity: battery racks and outdoor storage cabinets, charger cabinets and wall-box mounting plates for EV charging, fixed-tilt and rooftop solar mounting structures, inverter pedestals and rain shields, smart-meter and ring-main enclosures, and at the grid end, transformer platforms, equipment support stands and cable-riser frames.
For wind and hydro we make tower internal platforms and ladders, blade-root cradles, trash-rack panels, stop-log guide frames and powerhouse walkways.
Start from a range
The battery, EV and solar range groups the most-asked products: battery energy storage, EV charging, solar and inverter cabinets and smart metering. For the wider list, browse the sector pages below, or send a drawing.
What we make
Products for energy and ev.
Every product is made to order, in the size, material and finish you specify.
- Battery racks, indoor and outdoor storage cabinets, spill trays
- EV charger cabinets, pedestals, guards and wall-box plates
- Solar mounting structures, canopies and inverter shields
- Smart-meter, distribution and ring-main enclosures
- Substation, transformer and cable-riser support structures
- Wind-tower, hydro and power-plant access steelwork
The range
Choose a product, or send a drawing.
Add any product to your enquiry list and we quote them together. Anything not listed is made to your drawing.
Battery and energy storage
Energy Storage, Grid and Smart Metering
Indoor / Outdoor Battery Cabinet
100 kWh Air-Cooled, 1,000 × 1,000 × 2,000, IP54, with Rack Rails
Energy Storage, Grid and Smart Metering
Container Battery Rack
12 Modules of 60 kg, 1,000 × 800 × 2,200, HDG, with Anchored Base Rails
Energy Storage, Grid and Smart Metering
Open Battery Rack
4 Tiers for 48 V Lithium Modules, 600 × 700 × 1,900, 100 kg per Tier, Powder-Coated
Renewable Energy
3-Tier Battery Rack with Spill Trays and Seismic Bracing
The battery rack with a folded spill tray under each tier and diagonal bracing in both directions for earthquake zones.
Energy Storage, Grid and Smart Metering
Battery Module Lift Trolley
250 kg, Hand Winch and Fork Platform, for Loading Racks up to 2.0 m
Renewable Energy
Home Energy-Storage Wall Cabinet
800 × 600 × 250, 5 kWh Lithium and Hybrid Inverter, IP55
EV charging
Energy Storage, Grid and Smart Metering
DC Fast Charger Power Cabinet
120 kW, 800 × 800 × 2,000, IP54, Filtered Vents and Module Rails
Energy Storage, Grid and Smart Metering
Satellite Dispenser Cabinet for Split DC Charger
500 × 350 × 1,600, Cable Holster and Display Window
Energy Storage, Grid and Smart Metering
Multi-Socket Charging Pedestal for E-Scooters and E-Rickshaws
4 Sockets, 400 × 300 × 1,200, IP54
Electrical & Power
EV Charging Feeder Pillar
4 Bays (4 × 22 kW AC), IP54, with MCCB / RCD Compartments
Renewable Energy
EV Charger Protection Bollard
Ø114 × 1,000, HDG Pipe with Base Plate and Reflective Band (No Crash Rating)
Energy Storage, Grid and Smart Metering
EV Charger Wheel Stop and Guard Rail Set
1.8 m, HDG Tube, with Base Plates (No Crash Rating)
Solar and rooftop
Renewable Energy
Solar Panel Mounting Structures
Durable frameworks for securing solar panels at optimal angles. Made to order in GI/HDG C-sections + ISMC/SHS, to your drawing.
Solar Energy Systems
Ground-Mount Fixed-Tilt Table, 2P × 4 (8 Modules)
HDG C-Section, Ramming-Pile Ready
Renewable Energy
Solar Junction Boxes
Connection points for solar panel circuits with diodes. Made to order in GI/SS 1.2 mm, to your drawing.
Renewable Energy
Solar Array Supports
Ground-mounted structures for commercial installations. Made to order in GI/HDG steel, to your drawing.
Grid, substation and metering
Energy Storage, Grid and Smart Metering
Transformer Platform for Pole Structure (DP)
up to 160 kVA, 2,400 × 1,500, ISMC 100 Rails, HDG
Energy Storage, Grid and Smart Metering
Lightning Mast Base Plate and Anchor Template
500 × 500 × 12 mm, 8 Holes, with Gusset Ring, HDG
Energy Storage, Grid and Smart Metering
Four-Meter Cluster Box for Apartments and Shops
600 × 500 × 200, 1.2 mm CRCA with Four Meter Windows
Energy Storage, Grid and Smart Metering
Distribution Transformer (DT) Metering Box with CT Chamber
500 × 400 × 250, IP54, Lockable with Antenna Pocket
Electrical & Power
Meter Boxes
A single-phase or three-phase meter box in galvanised sheet with a window and a lead-seal hasp so the utility can seal it. GI needs a zinc-safe weld or a rivet-and-seam construction.
Energy Storage, Grid and Smart Metering
On-Load Tap-Changer Drive Cabinet
500 × 400 × 700, SS304 1.5 mm, IP55, with Heater and Vent
Wind, hydro and power plant
Wind, Hydro and Power-Plant Structures
Wind Tower Internal Platform Segment
1,100 × 2,300, 4 mm Chequered Plate on Five Stiffener Flats, Bolted, HDG (4 Segments per Level)
Wind, Hydro and Power-Plant Structures
Wind Tower Internal Ladder Section
3 m, Steel, 450 Wide, with Fall-Arrest Rail Bracket Plates, HDG
Wind, Hydro and Power-Plant Structures
Tower Base Electrical Cabinet Skid
2,000 × 1,000 × 300, ISMC 100 Rails, HDG, with Lifting Lugs
Wind, Hydro and Power-Plant Structures
Wind Blade Root Cradle Stand
3 t, 1,500 × 1,200 × 900, with Rubber Saddle Pads, HDG (Yard and Transport)
Wind, Hydro and Power-Plant Structures
Stop-Log Guide Frame for Channel Gate
1,500 Wide × 2,500 High, ISMC 150 Guides and Sill, Embedded, HDG
Wind, Hydro and Power-Plant Structures
Plant Access Platform
3,000 × 2,000, 3 m High, ISMC 100 Frame with Grating Floor Supports, Handrail and Toe Board, HDG
Clean fuels and bioenergy
Clean Fuels, Bioenergy and Gas Infrastructure
Industrial Gas Cylinder Trolley
2 Cylinders of 230 mm, 550 Wide, Chain and Pneumatic Wheels, Powder-Coated
Clean Fuels, Bioenergy and Gas Infrastructure
Digester Gas-Dome Access Manhole Cover and Frame
700 × 700, 6 mm, Bolted with Gasket, HDG
Clean Fuels, Bioenergy and Gas Infrastructure
Biogas Genset Acoustic Canopy
50 kW, 2,400 × 1,100 × 1,500, 1.5 mm CRCA, Louvred, with Lift-Off Roof and Exhaust Cut-Outs
Clean Fuels, Bioenergy and Gas Infrastructure
Biomass Pellet Bin and Feeder Hopper
0.6 m3, 3 mm MS, Sloped 65 Degrees, Slide Gate and Stand
Related ranges
Also from Essar
Shims for solar, wind and energy
U-shims, shim rings, packing and laminated shims, 0.05 to 6 mm, made to your drawing
ExploreAlso from Essar
Battery, EV and solar cabinets
Battery racks, charger cabinets, inverter enclosures, smart-meter boxes
ExploreAlso from Essar
Electrical enclosures and panels
Meter boxes, distribution boxes, feeder pillars, cable trays
ExploreFAQ
Energy and EV: questions
Do you make complete battery or charger units?
We make the cabinets, racks, pedestals and structures. Batteries, chargers, inverters and electronics are fitted to order from your supplier or ours.
Are outdoor cabinets weatherproof?
We design outdoor cabinets with drip edges, gaskets and sloped roofs. The ingress-protection rating is a design target that is confirmed by test on the first article.
Can you galvanise solar structures?
We fabricate in pre-galvanised sections, and arrange hot-dip galvanising where the drawing calls for it. Tell us the coating thickness you need.
Send your drawing or your list
Tell us what you need for energy and ev: the product, the size, the material and how many. We reply with a clear quotation.