3D illustration of the reference design
EV Charging Feeder Pillar
4 Bays (4 × 22 kW AC), IP54, with MCCB / RCD Compartments
A feeder pillar 900 × 1,500 × 400 with a double door, three compartments (incomer, MCCBs, RCDs), a base plinth with cable entry and a padlock; it brings AC power to four 22 kW EV chargers.
Specification
| Overall size (W × H × D) | 900 × 1,500 × 400 mm |
|---|---|
| Material and thickness | GI sheet; body 2 mm, door 2 mm, plate 2.5 mm |
| Protection target (confirmed by test on the order) | IP54 (outdoor) |
| Doors and access | 2 door(s); 3-point rod lock with padlockable swing handle (SS304) |
| Mounting | Bolted to a concrete plinth (4 × M16 anchor bolts through the base ring) |
| Finish | Zinc-phosphate pre-treatment + epoxy primer + polyester powder RAL 7035, 80-100 µm (duplex); or hot-dip galvanised + powder for coastal sites |
| Product code | 2.17 |
Fitted to order
- Hinge
- Lock
- Gasket
- Fasteners
- Earthing
- MCCBs, RCDs, busbars
- Glands and locks
- Finish
Part of the range: EV charger cabinets and pedestals
You may also need.
Control Panels
Indoor floor-standing cabinet for control panels, MCC, PLC and VFD panels. Made to order in CRCA 2.0 mm, to your drawing.
Feeder Pillars
Heavy-gauge (3 mm) free-standing outdoor cabinet for low-voltage distribution. The changes from a small wall box are the base ring, the rain canopy, double door with a 3-point lock and ventilation that keeps rain out.
Command Control Centres
An operator console-style control centre: 1,000 wide, 1,400 high with a sloped upper front carrying the HMI and push-buttons. Two doors give access to the wiring.
Need a different size or material?
Send a drawing, a sample or a description. We make it to your specification and reply with a clear quotation.