Equipment Mounting Brackets
A heavier braced bracket pair for wall- or roof-mounted units up to 150 kg: 50 × 50 × 5 wall and arm angles with a 40 × 40 × 4 diagonal, 600 mm arm, multi-angle adjustment holes.
3D illustration of the reference design
HVAC & Refrigeration · Brackets, mounts and base plates
Split-Unit Bracket Pair
HDG, with Anti-Vibration Pads and Drain Guide
The split-AC bracket pair hot-dip galvanised after fabrication, with rubber anti-vibration pads under the unit feet and a clip that guides the drain hose away from the wall.
Specification
| Overall size | 690 × 450 × 400 mm |
|---|---|
| Material | Mild-steel HR sheet/plate |
| Finish | Pre-treatment + polyester powder white/grey, 60 µm, or zinc plating; SS304 for coastal sites |
| Approx. metal weight | 6.7 kg |
| Product code | 8.04 |
Fitted to order
- Anchors
- Rubber pads
- Drain-hose guide clip
Reference design, made to order. Size, material, finish and fittings follow your drawing. Protection ratings and loads are design targets, confirmed by test on the first article of each order.
Related products
You may also need.
Motor Mounting Brackets
A small braced bracket pair for a fan motor: 40 × 40 × 4 angles with a 30 × 30 × 3 diagonal, 300 mm arm and slotted holes so the motor position can be adjusted for belt tension.
Split Unit Wall Mounts
The commonest HVAC metal part in India. A pair of braced brackets holds an outdoor condenser (up to about 80 kg) on a wall.
Condenser Guards
A perforated steel guard: Ø8 holes on 12 mm pitch (60° stagger) gives about 40 % open area; larger holes (Ø12 on 16) give about 51 %. Guard rules limit hole size to keep fingers out of the fan.
Need a different size or material?
Send a drawing, a sample or a description. We make it to your specification and reply with a clear quotation.