Control Unit Housings
A small two-part box: folded tray with welded corners, and a lid screwed down on a gasket.

3D illustration of the reference design
A wall-mount weatherproof housing for an AC EV charger: a gasketed door, a sloped hood, a tamper switch bracket and a cable holster. The charger maker supplies the electronics and its safety approval.
| Overall size (W × H × D) | 350 × 450 × 180 mm |
|---|---|
| Material and thickness | GI sheet; body 2 mm, door 2 mm, plate 2.5 mm |
| Protection target (confirmed by test on the order) | IP65 (outdoor) |
| Doors and access | 1 door(s); Key / RFID-ready lock with tamper switch bracket |
| Mounting | 4 external welded lugs (slots 8 × 14) |
| Finish | Powder coat RAL 7035 UV polyester, 80 µm; SS304 for coastal sites |
| Product code | 7.14 |
Part of the range: EV charger cabinets and pedestals
A small two-part box: folded tray with welded corners, and a lid screwed down on a gasket.
The ECU housing sealed to IP67 with a membrane vent, a bolted ground tab and the connector cut-out held to ±0.1 mm.
A lockable steel box that hangs from the chassis rail of a truck or bus for tools, a battery or a spare.
A patient-compartment cabinet for equipment: a lockable door that stays shut in an impact, rounded internal and external edges, hygienic surfaces and tie-down rails. The ambulance builder's drawing and the ambulance code decide loads and fixings.
Send a drawing, a sample or a description. We make it to your specification and reply with a clear quotation.