3-Tier Battery Rack with Spill Trays and Seismic Bracing
The battery rack with a folded spill tray under each tier and diagonal bracing in both directions for earthquake zones.
3D illustration of the reference design
Renewable Energy · Steel structures (tables, supports, racks)
Wall-Mounted Battery Rack for 48 V Lithium Modules
2 Shelves, 60 kg Each, Anchored
A wall-anchored rack for two 48 V lithium modules: four uprights, two shelf rings, a back diagonal and a front retention bar.
Specification
| Overall size | 600 × 500 × 1,000 mm |
|---|---|
| Material | Mild-steel HR sheet/plate |
| Finish | Epoxy-polyester powder (acid-resistant) RAL 7035, 80 µm; or epoxy paint |
| Approx. metal weight | 33.2 kg |
| Design load (confirmed per order) | 1,000 kg |
| Product code | 6.12 |
Fitted to order
- Anchors
- Retention straps
Reference design, made to order. Size, material, finish and fittings follow your drawing. Protection ratings and loads are design targets, confirmed by test on the first article of each order.
Part of the range: Battery racks and energy-storage cabinets
Related products
You may also need.
Solar Water-Heater Stand
A pitched stand for a two-collector thermosyphon solar water heater: three rafters at 30 degrees, lower legs, a heavy rear beam carrying the tank saddles and diagonals at the rear against sway.
Battery Racks
Steel angle uprights with RHS shelf beams for 12 VRLA batteries of about 45 kg each (180 kg per tier; 540 kg per rack; the frame is designed for 1000 kg+).
Wind Turbine Components
A typical small-wind fabricated part: the yaw base plate that joins the tower to the nacelle.
Need a different size or material?
Send a drawing, a sample or a description. We make it to your specification and reply with a clear quotation.