3D illustration of the reference design
Telecom & Data Centre · Welded structural mounts
Shelter-to-Tower Ice Bridge (Feeder Cable Support Frame)
3 m Span, HDG, with Cable Ladder
A 3 m ice bridge: two 50 × 30 × 3 rails with angle rungs every 300 mm on three pairs of 60 × 60 posts tied at 1,200 mm; each span carries 75 kg of feeder cable.
Specification
| Overall size | 3,000 × 450 × 2,500 mm |
|---|---|
| Material | Mild-steel HR sheet/plate |
| Finish | Hot-dip galvanised after fabrication (vent holes in every tube), 85 µm |
| Approx. metal weight | 123.9 kg |
| Design load (confirmed per order) | 150 kg |
| Product code | 3.57 |
Fitted to order
- Cable clamps and anchors
- Earth strap
Reference design, made to order. Size, material, finish and fittings follow your drawing. Protection ratings and loads are design targets, confirmed by test on the first article of each order.
Part of the range: Outdoor and telecom cabinets
Related products
You may also need.
Antenna Mounts
A wall-fixed arm frame carrying a 60.3 mm mast for a panel antenna. Made to order in GI angle 40-50 mm, HDG, to your drawing.
Antenna Pole Clamp Set and Feeder-Cable Ladder Brackets
The bracket that holds the feeder-cable ladder (or a pole clamp arm) on a tower or rooftop pole: 6 mm plate bent into an L with a welded gusset and two Ø14 holes for the U-bolts.
Need a different size or material?
Send a drawing, a sample or a description. We make it to your specification and reply with a clear quotation.