Level-Sensor and Flow-Meter Mounting Brackets
Made to order in SS304 3 mm, adjustable arms. Size, finish and fittings to your drawing.
3D illustration of the reference design
Water Treatment & Mining · Frames, skids, ladders and supports
Overhead Water Tank Stand
HDG Angle, 1,500 × 1,500 × 2,400, for 1,000-2,000 L Tanks
A braced tower for a 1,000-2,000 L plastic tank: four ANGLE 65 × 65 × 6 posts, a top ring of RHS 100 × 50 × 4 that carries the tank, a mid ring and two braced panels in every face; galvanised.
Specification
| Overall size | 1,500 × 1,500 × 2,400 mm |
|---|---|
| Material | Mild-steel HR sheet/plate |
| Finish | Hot-dip galvanised after fabrication, with vent holes |
| Approx. metal weight | 203.1 kg |
| Design load (confirmed per order) | 2,000 kg |
| Product code | 12.37 |
Fitted to order
- Anchors
- Fasteners
Reference design, made to order. Size, material, finish and fittings follow your drawing. Protection ratings and loads are design targets, confirmed by test on the first article of each order.
Related products
You may also need.
Manual Bar Screen for Channels
A hand-raked bar screen: 31 flat bars 40 × 6 at 25 mm clear spacing welded between two side angles at about 75 degrees, with a mid support angle.
Pump Base Frame with Grout Holes and Motor Slide Rails
A welded steel base under a pump-motor set: two ISMC 100 rails, three ISMC 75 cross-members, faced seating plates for the pump and motor, and grout holes.
Tank Ladder with Safety Cage and Rest Platform
The tank ladder with a full safety cage from 2.5 m and a chequered-plate rest platform at mid-height, fixed to the wall every 1.5 m.
Need a different size or material?
Send a drawing, a sample or a description. We make it to your specification and reply with a clear quotation.