Wind Tower Internal Platform Segment
1,100 × 2,300, 4 mm Chequered Plate on Five Stiffener Flats, Bolted, HDG (4 Segments per Level)
Industry
Wind, hydro and power-plant steelwork, made to drawing
Wind-tower internal platforms, ladders and access doors, tower-base cabinet skids, blade-root cradles, hydro trash racks and gate frames, penstock saddles, and plant platforms, staircases, walkways and handrails.
Steelwork for power plants
Power plants are held together by fabricated steel: platform segments, ladders and access-door leaves inside wind towers, cradle stands for blades in the yard, trash-rack panels and stop-log guide frames at hydro intakes, saddle supports for penstocks, and the platforms, staircases, grating walkways and handrails that let people reach the plant safely.
We fabricate to your drawing, in the steel grade and coating the project specifies.
What we make
Products for wind, hydro and power-plant structures.
Every product is made to order, in the size, material and finish you specify.
- Wind-tower internal platforms, ladders and access-door leaves
- Tower-base electrical cabinet skids and cable-tray brackets
- Blade-root cradle stands and yard equipment
- Hydro trash-rack panels, stop-log guide frames and penstock saddles
- Plant access platforms, industrial staircases and walkway grating
- Handrail and toe-board systems, generator-set base frames
The range
Choose a product, or send a drawing.
Add any product to your enquiry list and we quote them together. Anything not listed is made to your drawing.
Wind-tower internals and yard equipment
6 products
Wind Tower Access Door Leaf
650 × 1,950, 4 mm, Folded Frame Edge, with Gasket Channel and Lock Provision, HDG or Painted
Wind Tower Internal Ladder Section
3 m, Steel, 450 Wide, with Fall-Arrest Rail Bracket Plates, HDG
Tower Base Electrical Cabinet Skid
2,000 × 1,000 × 300, ISMC 100 Rails, HDG, with Lifting Lugs
Wind Blade Root Cradle Stand
3 t, 1,500 × 1,200 × 900, with Rubber Saddle Pads, HDG (Yard and Transport)
Hydropower and pumped-storage steelwork
4 products
Trash Rack Panel for Hydro Intake
2,000 × 3,000, Flat Bars 60 × 10 at 70 mm Pitch, HDG, with Lifting Eyes
Stop-Log Guide Frame for Channel Gate
1,500 Wide × 2,500 High, ISMC 150 Guides and Sill, Embedded, HDG
Penstock Saddle Support Frame for 1.2 m Pipe
3 t, ISMC 200 Base Beams with Saddle Plates, HDG
Powerhouse Walkway Grating Panel
1,000 × 800, Welded Bearing Bars 40 × 3 at 30 mm, HDG, with Edge Angles and Clips
Power-plant access structures and site equipment
7 products
Plant Access Platform
3,000 × 2,000, 3 m High, ISMC 100 Frame with Grating Floor Supports, Handrail and Toe Board, HDG
Industrial Staircase
3 m Rise, 1,000 Wide, ISMC 150 Stringers, 4 mm Chequered Treads at 250 Rise, Handrail, HDG
Handrail and Toe-Board System
6 m Run with Posts at 1.2 m, Ø42.4 Top Rail, HDG (Plants, Roofs and Walkways)
Diesel Generator Set Base Frame
250 kVA, 3,200 × 1,200 × 350, ISMC 200 Rails with Anti-Vibration Mounts and Fuel-Tank Provision, HDG
Cable Drum Lifting Stand
Pair, 3 t, with Axle Bar and Screw Jacks, 800 × 600 × 600, Powder-Coated
Heavy-Duty Plant Tool and Spares Cabinet
1,000 × 500 × 1,800, 2.0 mm, Two Doors, Six Shelves for 100 kg Each
Lockout-Tagout Station Wall Cabinet
800 × 600 × 150, 1.5 mm, with Padlock Hasp Bars and Tag Holders, Powder-Coated Red
Related ranges
Also from Essar
Shims for solar, wind and energy
U-shims, shim rings, packing and laminated shims, 0.05 to 6 mm, made to your drawing
ExploreAlso from Essar
Electrical enclosures and panels
Meter boxes, distribution boxes, feeder pillars, cable trays
ExploreAlso from Essar
Storage racks and lockers
Shelving, pallet racks, tool and kit lockers
ExploreFAQ
Wind, hydro and power-plant structures: questions
Can you work to a structural drawing?
Yes. Send the drawing with the steel grade, thicknesses, coating and quantity, and we quote.
Do you do welding procedures and records?
We weld to the procedure agreed with you for the order. Tell us the welding and inspection records you need before we quote.
Send your drawing or your list
Tell us what you need for wind, hydro and power-plant structures: the product, the size, the material and how many. We reply with a clear quotation.