Medical Trolleys
The medical/hospital workhorse: 25.4 mm SS304 tube legs, 19 mm rails, two dished shelf trays and a push handle. The tube joints are TIG-welded, ground and polished so no crevice remains.
Industry
Hospital trolleys, carts and equipment, in stainless steel
Medical and instrument trolleys, crash carts, mobile workstations, bedside lockers, overbed tables, bio-medical waste bin stands, equipment stands, device enclosures and brackets.
Stainless steel for the ward
Hospitals need metalwork that cleans easily and lasts: welded stainless-steel trolleys for instruments, dressings, medication and linen, crash carts with drawers, mobile workstations, patient step stools, overbed tables and bedside lockers, three-panel privacy screens and colour-coded waste-bin stands with foot pedals. We make them with smooth welds, rounded corners and castors fitted to suit the floor.
Device makers also use us for enclosures, trays, panels, brackets, holders and railings. Medical-device approvals belong to the device maker; we fabricate to your drawing and your quality documents.
What we make
Products for medical and hospital equipment.
Every product is made to order, in the size, material and finish you specify.
- Instrument, dressing, medication and linen trolleys
- Crash carts with drawers, mobile workstations
- Bedside lockers, overbed tables, step stools
- Bio-medical waste bin stands and privacy screens
- Equipment stands, device enclosures and trays
- Brackets, holders and railings
The range
Choose a product, or send a drawing.
Add any product to your enquiry list and we quote them together. Anything not listed is made to your drawing.
Carts, trolleys and stands (welded stainless tube)
23 products
Equipment Stands
A sturdy stand for medical equipment: 500 × 500 footprint, an upper platform 1,000 mm high for the device and a lower shelf for accessories; the base is heavy for stability and adjustable feet can replace castors.
Crash Carts
An emergency cart with 5-8 drawers behind a breakaway seal, a top shelf for the defibrillator and side rails; the welded tube frame carries folded drawer bodies on ball-bearing slides.
Mobile Workstations
A point-of-care computing cart: a 500 × 500 frame carrying a work surface, monitor arm and a battery box on the lower shelf; the lower shelf carries the mass so the cart is stable when the top is loaded.
Medical Cart Frames
Structural framework for customised medical carts. Made to order in SS304 tube, to your drawing.
Bedside Locker Frames
The frame of a patient's bedside locker: 450 × 450 × 800 with a towel rail on the top edge, a drawer bay and an open lower shelf; the body panels are fitted after welding.
More in this group: Bio-Medical Waste Bin Stand (Colour-Coded) with Foot Pedal · 3-Panel Bedside Privacy Screen · Crash Cart: 5 Drawers · Medication Distribution Trolley · Linen / Laundry Trolley · Patient Step Stool · Twin Oxygen-Cylinder Trolley with Safety Chain · Sterile-Supply (CSSD) Tray Transfer Trolley · Pharmacy Storage Rack · Mortuary Trolley · IV Stands · IV Stand: Weighted Round Base · Mayo Instrument Tray Stand · Examination Couch Frame with Perforated Deck · Bedside Cabinet with Overbed Shelf and Lockable Drawer
Cabinets and lockers (folded stainless)
4 products
Storage Cabinets
A hygienic 2-door storage cabinet in 1.2 mm SS304: smooth internal faces, sloped or sealed top, no exposed screw heads on the outside, shelves on adjustable pins. Dispensing cabinets add locks with access control; steriliser cabinets add a sealed door and a UV/ozone unit.
Dispensing Cabinets
A locked medication cabinet: two doors with a keypad or biometric lock cut-out, tracked drawers and an inventory reader bracket; 1.5 mm SS304.
Antimicrobial Powder-Coated Storage Cabinet with Glass Doors
Made to order in CRCA 1.0 mm, antimicrobial powder, 800 × 1,800 × 400 mm. Size, finish and fittings to your drawing.
Device enclosures and housings
6 products
Wall Mount Enclosures, 350 × 300 × 140 mm
One box, many products: diagnostic instrument housings, monitor cases, pump housings and countertop controls are this IP65 stainless enclosure with different cut-outs. Sloped top, no ledges, radius corners, silicone gasket.
Diagnostic Enclosures
Protective housing for sensitive diagnostic equipment. Made to order in SS304 / 316, 1.2-1.5 mm, to your drawing.
Infusion Pump Housings
A small chemical-resistant housing for a pump mechanism: 1.0 mm SS304, no exposed screws, a hinged front panel and a smooth sloped top so fluid runs off.
Monitor Housings
A flat housing for a bedside monitor or display with a VESA mounting plate on the back and a window opening in the door, in stainless or antimicrobial powder-coated steel.
Countertop Enclosures
A desktop device housing with a sloped control face, rubber feet and a rear vent; ergonomic and easy to wipe down.
Sterile Pass-Through Box with Interlocked Doors
A wall-mounted pass box for a clean/dirty interface: two flush doors on opposite faces that cannot open together (mechanical or electronic interlock), coved internal corners and a silicone door seal.
Trays and panels
3 products
Surgical Instrument Panels
A wall panel with a 6 mm hole grid on 25 mm pitch on which instrument holders hang; 20 mm returns stiffen the thin sheet and the panel hangs on a French cleat so it can be lifted off for cleaning.
Instrument Trays
Shallow tray for surgical/procedural instruments. 316L is preferred for chloride resistance in steriliser cycles.
Stainless Scrub Sink Trough with Splashback
A multi-bay surgical scrub trough 1,200 × 500 × 250 deep: a deep pan with a rolled edge and a splashback, drain sockets welded in and tap holes in the back. 1.5 mm SS304, all corners TIG-welded and polished.
Brackets, holders and railings
6 products
Stainless Steel Railings
Support and guidance systems for medical facilities. Made to order in SS304 tube 38 × 1.5 / 42.4 × 2.0, to your drawing.
Oxygen Cylinder Brackets
Seat plus back plate that carries a medical-gas cylinder (E cylinder about 9 kg full) and a strap that stops it falling.
Defibrillator Carriers
A wall or cart carrier for a 2.5-4 kg defibrillator: a shelf with a raised lip, a quick-release strap and a slot for the handle.
Lead-Apron and Coat Hanger Rack (Wall / Mobile)
Made to order in SS304 or powder-coated MS 3 mm. Size, finish and fittings to your drawing.
Related ranges
Also from Essar
Storage racks and lockers
Shelving, pallet racks, tool and kit lockers
ExploreAlso from Essar
Made-to-drawing fabrication
Send a drawing: punching, laser, forming, welding, finishing
ExploreAlso from Essar
Electrical enclosures and panels
Meter boxes, distribution boxes, feeder pillars, cable trays
ExploreFAQ
Medical and hospital equipment: questions
Which stainless steel do you use?
SS304 for most hospital furniture, and SS316 where cleaning chemicals demand it. Tell us the use and we confirm the grade.
Can you make a trolley to our design?
Yes. Send a drawing or a sample, with the load, the number of drawers and the castor size, and we quote.
Send your drawing or your list
Tell us what you need for medical and hospital equipment: the product, the size, the material and how many. We reply with a clear quotation.