TV Wall Mounts
The fixed wall plate that carries a TV (75 kg design 112 kg, with 1.5 dynamic factor) at 40 mm from the wall.
Industry
Mounts, stands and housings for consumer electronics, made to order
TV and monitor wall mounts, projector ceiling mounts, security-camera brackets, laptop and soundbar stands, headset and controller racks, cases and housings, and cable trays and trunking.
Small metal parts, made in volume
Consumer products use many small, accurate metal parts. We make wall and ceiling mounts, hooks and shelf brackets, cases, housings and boxes, cable trays and trunking, stands and frames, kiosks, plates and nameplates, with the cut-outs, bends and finishes you specify, from a prototype to repeat batches.
What we make
Products for consumer electronics and mounts.
Every product is made to order, in the size, material and finish you specify.
- TV, monitor and projector wall and ceiling mounts
- Security-camera mounts and installation hardware kits
- Laptop, soundbar and set-top-box stands and shelves
- Headset and controller wall racks, display hooks
- Cases, housings and kiosk enclosures
- Cable trays, trunking and under-desk trays
The range
Choose a product, or send a drawing.
Add any product to your enquiry list and we quote them together. Anything not listed is made to your drawing.
Wall and ceiling mounts, hooks and small brackets
15 products
Installation Hardware Kits
A small L bracket that goes into a retail-ready pack of 10-25 pieces: fasteners, plugs and small brackets; the bracket is 2.5 mm, 30 wide.
Headphone Display Hooks
Wall or desk-mounted headphone holders. Made to order in Al 2 mm / SS304 3 mm bar, to your drawing.
Security Camera Mounts
An indoor/outdoor CCTV bracket: a 2 mm arm 50 wide with a fitted ball joint on the end for the 360 degree adjustment; outdoor versions are galvanised or powder coated.
Monitor / Laptop Wall Arm Plate
Made to order in Steel 3-4 mm. Size, finish and fittings to your drawing.
Soundbar and Set-Top-Box Wall Shelf
A wall shelf 500 wide and 150 deep under a wall TV for a soundbar or set-top box; a folded 1.5 mm shelf with a vent slot at the rear.
Headset and Controller Wall Rack
An L-shaped wall rack in 2.5 mm black powder-coated steel: the 100 mm leg screws to the wall, the 80 mm leg is the shelf for a controller, and a fitted hook under the shelf holds the headset.
More in this group: Foldable Laptop Stand · Projector Ceiling Mounts · Shelf Bracket · Balcony Railing Planter Bracket · Bicycle Wall-Mount Hook Bracket with Wheel Tray · Wall-Mounted Fold-Down Desk Bracket Pair · Bathroom Wall Shelf
Cases, housings and boxes
12 products
Network Switch Boxes
A locking wall box for a small switch, patch panel and router, with side vents, brush cable entry and 19-inch rails for a 24-port switch.
Home Automation Panels
A flush wall panel 250 × 250 with a screen cut-out for a 10-15 inch smart-home controller in brushed aluminium, over a back box 60 deep with knock-outs.
Compact 6U Wall Network Cabinet for Homes and Small Offices
A 6U wall cabinet 600 × 400 × 450 with 19-inch rails, a door with a toughened-glass window, side vents and brush cable entries, for homes and small offices.
Wi-Fi Router Housings
A small case for networking and set-top gear: a folded body, a lid with perforated vents for cooling, keyhole slots for wall mounting and rubber feet.
IoT Sensor Enclosures
A small sealed sensor housing 100 × 80 × 40 in 1.0 mm aluminium, IP65, with a gland and a mounting ear.
Speaker Enclosures
A metal cabinet for a speaker, 250 × 160 × 140 in 1.2 mm powder-coated steel with a punched grille on the front and a rear terminal plate.
Smart Device Enclosures
A custom housing for a smart device, 140 × 100 × 45 in 1.0 mm aluminium with fitted ABS parts (front bezel or window).
Set-Top Box Cases
A case for a streaming box, 200 × 140 × 40, with a perforated top for cooling and shielding available for EMI; 0.8 mm keeps it light.
More in this group: Control Module Cases · Router / Set-Top Box Case with Slotted Vents and Tool-Free Lid · Letterbox / Mail Box · Wall Key Cabinet
Cable trays and trunking
4 products
Cable Management Trays
A light under-desk basket: 0.8 mm CRCA U-channel with lips, perforated, 1 m long. Made to order in CRCA 0.8-1.0 mm, to your drawing.
Cable Raceway (Adhesive-Backed) for Wall and Desk
A small surface raceway 25 × 15 × 2,000 in 0.8 mm sheet with a snap-on cover and adhesive tape, to hide cables on walls and desks.
Under-Desk Power Strip Mount and Cable Basket
A 400 mm long basket that holds a power strip and adaptors under a desk, with ventilation slots and rolled edges.
Under-Desk Cable Tray with Adjustable Slots and Cable Ties
The under-desk tray with 6 × 20 slots along the rails so it fits any desk, small tie holes and rolled edges.
Stands and frames
8 products
Media Centre Frames
A modular entertainment-centre frame: four 30 × 30 tube posts with three tiers of 40 × 20 rails, cable routing through the rear posts and steel shelf decks; modules bolt side by side.
Gaming Console Stands
A small console stand 300 × 200 × 200 that holds a console vertically or horizontally with an open back for airflow and an integrated cable clip.
Charging Station Frames
A frame 600 × 300 × 800 for a multi-device charging station with 4-12 ports, two shelves and a built-in cable route.
Keyboard Mounting Frames
A wall-mounted keyboard tray/frame 300 wide with height and angle adjustment slots and a scratch-resistant finish; the plate is 1.5 mm.
Corner Shelf and Wall Shelving Kit (Tube + Sheet)
Made to order in CRCA 0.8-1.2 mm shelf + C8 brackets. Size, finish and fittings to your drawing.
Kiosks and floor-standing housings
3 products
Touchscreen Kiosk Housings
A floor-standing kiosk shell for a large touchscreen: a stiff 1.5 mm body, a bezel that hides the screen edge, ventilation for the display's heat and a locked rear door for the PC/printer.
Multi-Bay Device Charging Cabinet for Schools
A 20-slot charging cabinet 700 × 1,200 × 450 for tablets or phones: ventilated dividers, a cable pass-through and a lockable double door.
More consumer electronics products
2 products
Related ranges
Also from Essar
Electrical enclosures and panels
Meter boxes, distribution boxes, feeder pillars, cable trays
ExploreAlso from Essar
Storage racks and lockers
Shelving, pallet racks, tool and kit lockers
ExploreAlso from Essar
Made-to-drawing fabrication
Send a drawing: punching, laser, forming, welding, finishing
ExploreFAQ
Consumer electronics and mounts: questions
Can you make a bracket to my sample?
Yes. Send a sample or a drawing, with the load, the finish and the quantity, and we quote.
Do you do powder coating in my colour?
Yes. Tell us the RAL colour and the texture, and we match it.
Send your drawing or your list
Tell us what you need for consumer electronics and mounts: the product, the size, the material and how many. We reply with a clear quotation.