Renewable Energy
Solar Panel Mounting Structures
Durable frameworks for securing solar panels at optimal angles. Made to order in GI/HDG C-sections + ISMC/SHS, to your drawing.
Energy, EV and solar
Solar structures and inverter enclosures
Metalwork for solar plants: fixed-tilt mounting structures, inverter enclosures and sun shields, string junction boxes, pump array stands, module handling carts and storage stillages.
Solar plants need structures that survive sun, rain and wind for decades, so most of our solar products are hot-dip galvanised or pre-galvanised steel. Mounting tables, rails, purlins and posts are punched and formed to your layout; inverter enclosures and shields protect equipment from sun and rain; stillages and carts move modules safely on site.
- Fixed-tilt mounting tables, ground-mount posts and rails, purlins
- Inverter enclosures, wall brackets and sun and rain shields
- String and array junction boxes, solar street-light boxes and brackets
- Levelling shims for structures on uneven foundations
Products in this range
Renewable Energy
Solar Array Supports
Ground-mounted structures for commercial installations. Made to order in GI/HDG steel, to your drawing.
Renewable Energy
Inverter Enclosures
A wall-mounted cabinet for a string inverter or a compact power unit, with side louvres, filtered fans and a sun shield.
Renewable Energy
Solar Junction Boxes
Connection points for solar panel circuits with diodes. Made to order in GI/SS 1.2 mm, to your drawing.
Renewable Energy
Solar Street Light Enclosures
A pole-top box for the controller and battery of a solar street light in 2 mm aluminium sheet with a gasketed lid, pole-band slots and a tamper screw.
Renewable Energy
Inverter Wall-Mount Bracket with Sun Shield
Made to order in GI 2.0-3.0 mm. Size, finish and fittings to your drawing.
Renewable Energy
Solar Water-Heater Stand
A pitched stand for a two-collector thermosyphon solar water heater: three rafters at 30 degrees, lower legs, a heavy rear beam carrying the tank saddles and diagonals at the rear against sway.
Solar Energy Systems
Solar Street-Light Panel Arm and Battery-Box Bracket for 76-114 mm Poles
4 mm, HDG
Shims and Precision Packing
Solar structure levelling shim, galvanised
80 × 80 mm, 18 mm slot, 1.5 to 3.0 mm, in two sizes
FAQ
Questions buyers ask
Do you design the mounting structure?
We make to your structural drawing. If you give the module size, tilt and site wind speed, we can propose a layout for your engineer to approve.
What coating do you use?
Hot-dip galvanised or pre-galvanised steel, with powder coating on enclosures. Coastal sites can use thicker zinc or stainless steel.
Also from Essar
Related
Battery racks and energy-storage cabinets
Battery racks, cabinets, stands and spill trays
ExploreRelated
EV charger cabinets and pedestals
DC fast-charger cabinets, pedestals and protection hardware
ExploreRelated
Meter boxes and metering cabinets
Smart-meter boxes, multi-meter cabinets and DT metering boxes
ExploreSend your drawing or your list
Tell us what you need, how many, and by when. We reply with a clear quotation.